This was a great setup and I used it for over a year. The VMware VSA Cluster was used with a special configuration to support only the 2 available NICs. Compliant with Disk Data Format (DDF) configuration on disk (COD).SAS and SATA drives are supported, but the mixing of SAS and SATA in the same RAID array is not supported.Connects to up to 32 SAS or SATA drives.Supports RAID levels 0, 1, 5, 10, and 50 (RAID 6 and 60 support with the optional M5000 Advanced Feature Key).
#Amd athlon ii neo n36l vmware esxi 6.7 code
512 MB onboard data cache (DDR2 running at 800 MHz).800 MHz PowerPC processor with LSI SAS2108 6 Gbps RAID on Chip (ROC) controller.Two Mini-SAS internal connectors (SFF-8087).The ServeRAID M5015 and ServeRAID M5014 adapter cards have the following specifications: The replacement Controller was an IBM Serveraid M5015. I replaced the IBM Serveraid MR-10il after a few weeks, because it does not have a backup battery and only 128MB of Cache. Two x4 SFF-8087 connectors on left side of Card.Low-profile MD2 half-length 2U form factor adapter card.Support for Logical Drive Migration, Global Hot Spare, and Rebuild and Rapid Restore features.Stripe unit sizes up to 1024 KB, default 256 KB.The additional NIC is patched via cross-over for the VMware VSA Cluster Back-end configuration. The onBoard NIC is used by ESXi Management and virtual machines. I installed one IBM Serveraid MR-10il inside each Microserver and one single-port Intel NIC. PSU: 150W DPS-150TB A from DELTA ELECTRONICS.Connections internal: 1x MiniSAS SFF-8087 auf 4-fach SATA Backplane (Raid0/1), 1x SATA, 1x USB Port AUF dem Board für Stick, 1x TPM Header.Connections external: 6x USB 2.0, 1x Gb LAN (HP NC107i with Broadcom Chip), 1x VGA, 1x E-Sata.Hard-Disks: 2 x 1 TB HDDs + 16 GB Enterprise SLC SSD.Expansion Slots: 1x PCIe 2.0 x16 LoW Profile, 1x PCIe 2.0 x1 LoW Profile.Memory: unbuffered, 2 DIMM-Slots DDR3, ECC and non-ECC (8 GB).CPU: AMD Athlon II Neo N36L 2x 1.30GHz, TDP 15W.HomeLab Stage XLV: New Monster WorkstationĪfter my self build ESXi homelab Project Stage I, I bought two new HP Microserver N36L with the following configuration:Įach HP Microserver has these specifications:.
0 kommentar(er)
